Skip to main content

Backup and Restore

Command summary

 BACKUP|RESTORE
TABLE [db.]table_name [AS [db.]table_name_in_backup]
[PARTITION[S] partition_expr [,...]] |
DICTIONARY [db.]dictionary_name [AS [db.]name_in_backup] |
DATABASE database_name [AS database_name_in_backup]
[EXCEPT TABLES ...] |
TEMPORARY TABLE table_name [AS table_name_in_backup] |
VIEW view_name [AS view_name_in_backup]
ALL TEMPORARY TABLES [EXCEPT ...] |
ALL [EXCEPT ...] } [,...]
[ON CLUSTER 'cluster_name']
TO|FROM File('<path>/<filename>') | Disk('<disk_name>', '<path>/') | S3('<S3 endpoint>/<path>', '<Access key ID>', '<Secret access key>')
[SETTINGS base_backup = File('<path>/<filename>') | Disk(...) | S3('<S3 endpoint>/<path>', '<Access key ID>', '<Secret access key>')]

ALL

Prior to version 23.4 of ClickHouse, ALL was only applicable to the RESTORE command.

Background

While replication provides protection from hardware failures, it does not protect against human errors: accidental deletion of data, deletion of the wrong table or a table on the wrong cluster, and software bugs that result in incorrect data processing or data corruption. In many cases mistakes like these will affect all replicas. ClickHouse has built-in safeguards to prevent some types of mistakes — for example, by default you can’t just drop tables with a MergeTree-like engine containing more than 50 Gb of data. However, these safeguards do not cover all possible cases and can be circumvented.

In order to effectively mitigate possible human errors, you should carefully prepare a strategy for backing up and restoring your data in advance.

Each company has different resources available and business requirements, so there’s no universal solution for ClickHouse backups and restores that will fit every situation. What works for one gigabyte of data likely won’t work for tens of petabytes. There are a variety of possible approaches with their own pros and cons, which will be discussed below. It is a good idea to use several approaches instead of just one in order to compensate for their various shortcomings.

note

Keep in mind that if you backed something up and never tried to restore it, chances are that restore will not work properly when you actually need it (or at least it will take longer than business can tolerate). So whatever backup approach you choose, make sure to automate the restore process as well, and practice it on a spare ClickHouse cluster regularly.

Backup to a local disk

Configure a backup destination

In the examples below you will see the backup destination specified like Disk('backups', '1.zip'). To prepare the destination add a file to /etc/clickhouse-server/config.d/backup_disk.xml specifying the backup destination. For example, this file defines disk named backups and then adds that disk to the backups > allowed_disk list:

<clickhouse>
<storage_configuration>
<disks>
<backups>
<type>local</type>
<path>/backups/</path>
</backups>
</disks>
</storage_configuration>
<backups>
<allowed_disk>backups</allowed_disk>
<allowed_path>/backups/</allowed_path>
</backups>
</clickhouse>

Parameters

Backups can be either full or incremental, and can include tables (including materialized views, projections, and dictionaries), and databases. Backups can be synchronous (default) or asynchronous. They can be compressed. Backups can be password protected.

The BACKUP and RESTORE statements take a list of DATABASE and TABLE names, a destination (or source), options and settings:

  • The destination for the backup, or the source for the restore. This is based on the disk defined earlier. For example Disk('backups', 'filename.zip')
  • ASYNC: backup or restore asynchronously
  • PARTITIONS: a list of partitions to restore
  • SETTINGS:
    • id: id of backup or restore operation, randomly generated UUID is used, if not specified manually. If there is already running operation with the same id exception is thrown.
    • compression_method and compression_level
    • password for the file on disk
    • base_backup: the destination of the previous backup of this source. For example, Disk('backups', '1.zip')
    • structure_only: if enabled, allows to only backup or restore the CREATE statements without the data of tables
    • storage_policy: storage policy for the tables being restored. See Using Multiple Block Devices for Data Storage. This setting is only applicable to the RESTORE command. The specified storage policy applies only to tables with an engine from the MergeTree family.
    • s3_storage_class: the storage class used for S3 backup. For example, STANDARD
    • azure_attempt_to_create_container: when using Azure Blob Storage, whether the specified container will try to be created if it doesn't exist. Default: true.

Usage examples

Backup and then restore a table:

BACKUP TABLE test.table TO Disk('backups', '1.zip')

Corresponding restore:

RESTORE TABLE test.table FROM Disk('backups', '1.zip')
note

The above RESTORE would fail if the table test.table contains data, you would have to drop the table in order to test the RESTORE, or use the setting allow_non_empty_tables=true:

RESTORE TABLE test.table FROM Disk('backups', '1.zip')
SETTINGS allow_non_empty_tables=true

Tables can be restored, or backed up, with new names:

RESTORE TABLE test.table AS test.table2 FROM Disk('backups', '1.zip')
BACKUP TABLE test.table3 AS test.table4 TO Disk('backups', '2.zip')

Incremental backups

Incremental backups can be taken by specifying the base_backup.

note

Incremental backups depend on the base backup. The base backup must be kept available in order to be able to restore from an incremental backup.

Incrementally store new data. The setting base_backup causes data since a previous backup to Disk('backups', 'd.zip') to be stored to Disk('backups', 'incremental-a.zip'):

BACKUP TABLE test.table TO Disk('backups', 'incremental-a.zip')
SETTINGS base_backup = Disk('backups', 'd.zip')

Restore all data from the incremental backup and the base_backup into a new table test.table2:

RESTORE TABLE test.table AS test.table2
FROM Disk('backups', 'incremental-a.zip');

Assign a password to the backup

Backups written to disk can have a password applied to the file:

BACKUP TABLE test.table
TO Disk('backups', 'password-protected.zip')
SETTINGS password='qwerty'

Restore:

RESTORE TABLE test.table
FROM Disk('backups', 'password-protected.zip')
SETTINGS password='qwerty'

Compression settings

If you would like to specify the compression method or level:

BACKUP TABLE test.table
TO Disk('backups', 'filename.zip')
SETTINGS compression_method='lzma', compression_level=3

Restore specific partitions

If specific partitions associated with a table need to be restored these can be specified. To restore partitions 1 and 4 from backup:

RESTORE TABLE test.table PARTITIONS '2', '3'
FROM Disk('backups', 'filename.zip')

Backups as tar archives

Backups can also be stored as tar archives. The functionality is the same as for zip, except that a password is not supported.

Write a backup as a tar:

BACKUP TABLE test.table TO Disk('backups', '1.tar')

Corresponding restore:

RESTORE TABLE test.table FROM Disk('backups', '1.tar')

To change the compression method, the correct file suffix should be appended to the backup name. I.E to compress the tar archive using gzip:

BACKUP TABLE test.table TO Disk('backups', '1.tar.gz')

The supported compression file suffixes are tar.gz, .tgz tar.bz2, tar.lzma, .tar.zst, .tzst and .tar.xz.

Check the status of backups

The backup command returns an id and status, and that id can be used to get the status of the backup. This is very useful to check the progress of long ASYNC backups. The example below shows a failure that happened when trying to overwrite an existing backup file:

BACKUP TABLE helloworld.my_first_table TO Disk('backups', '1.zip') ASYNC
┌─id───────────────────────────────────┬─status──────────┐
│ 7678b0b3-f519-4e6e-811f-5a0781a4eb52 │ CREATING_BACKUP │
└──────────────────────────────────────┴─────────────────┘

1 row in set. Elapsed: 0.001 sec.
SELECT
*
FROM system.backups
where id='7678b0b3-f519-4e6e-811f-5a0781a4eb52'
FORMAT Vertical
Row 1:
──────
id: 7678b0b3-f519-4e6e-811f-5a0781a4eb52
name: Disk('backups', '1.zip')
status: BACKUP_FAILED
num_files: 0
uncompressed_size: 0
compressed_size: 0
error: Code: 598. DB::Exception: Backup Disk('backups', '1.zip') already exists. (BACKUP_ALREADY_EXISTS) (version 22.8.2.11 (official build))
start_time: 2022-08-30 09:21:46
end_time: 2022-08-30 09:21:46

1 row in set. Elapsed: 0.002 sec.

Along with system.backups table, all backup and restore operations are also tracked in the system log table backup_log:

SELECT *
FROM system.backup_log
WHERE id = '7678b0b3-f519-4e6e-811f-5a0781a4eb52'
ORDER BY event_time_microseconds ASC
FORMAT Vertical
Row 1:
──────
event_date: 2023-08-18
event_time_microseconds: 2023-08-18 11:13:43.097414
id: 7678b0b3-f519-4e6e-811f-5a0781a4eb52
name: Disk('backups', '1.zip')
status: CREATING_BACKUP
error:
start_time: 2023-08-18 11:13:43
end_time: 1970-01-01 03:00:00
num_files: 0
total_size: 0
num_entries: 0
uncompressed_size: 0
compressed_size: 0
files_read: 0
bytes_read: 0

Row 2:
──────
event_date: 2023-08-18
event_time_microseconds: 2023-08-18 11:13:43.174782
id: 7678b0b3-f519-4e6e-811f-5a0781a4eb52
name: Disk('backups', '1.zip')
status: BACKUP_FAILED
error: Code: 598. DB::Exception: Backup Disk('backups', '1.zip') already exists. (BACKUP_ALREADY_EXISTS) (version 23.8.1.1)
start_time: 2023-08-18 11:13:43
end_time: 2023-08-18 11:13:43
num_files: 0
total_size: 0
num_entries: 0
uncompressed_size: 0
compressed_size: 0
files_read: 0
bytes_read: 0

2 rows in set. Elapsed: 0.075 sec.

Configuring BACKUP/RESTORE to use an S3 Endpoint

To write backups to an S3 bucket you need three pieces of information:

  • S3 endpoint, for example https://mars-doc-test.s3.amazonaws.com/backup-S3/
  • Access key ID, for example ABC123
  • Secret access key, for example Abc+123
note

Creating an S3 bucket is covered in Use S3 Object Storage as a ClickHouse disk, just come back to this doc after saving the policy, there is no need to configure ClickHouse to use the S3 bucket.

The destination for a backup will be specified like this:

S3('<S3 endpoint>/<directory>', '<Access key ID>', '<Secret access key>')
CREATE TABLE data
(
`key` Int,
`value` String,
`array` Array(String)
)
ENGINE = MergeTree
ORDER BY tuple()
INSERT INTO data SELECT *
FROM generateRandom('key Int, value String, array Array(String)')
LIMIT 1000

Create a base (initial) backup

Incremental backups require a base backup to start from, this example will be used later as the base backup. The first parameter of the S3 destination is the S3 endpoint followed by the directory within the bucket to use for this backup. In this example the directory is named my_backup.

BACKUP TABLE data TO S3('https://mars-doc-test.s3.amazonaws.com/backup-S3/my_backup', 'ABC123', 'Abc+123')
┌─id───────────────────────────────────┬─status─────────┐
│ de442b75-a66c-4a3c-a193-f76f278c70f3 │ BACKUP_CREATED │
└──────────────────────────────────────┴────────────────┘

Add more data

Incremental backups are populated with the difference between the base backup and the current content of the table being backed up. Add more data before taking the incremental backup:

INSERT INTO data SELECT *
FROM generateRandom('key Int, value String, array Array(String)')
LIMIT 100

Take an incremental backup

This backup command is similar to the base backup, but adds SETTINGS base_backup and the location of the base backup. Note that the destination for the incremental backup is not the same directory as the base, it is the same endpoint with a different target directory within the bucket. The base backup is in my_backup, and the incremental will be written to my_incremental:

BACKUP TABLE data TO S3('https://mars-doc-test.s3.amazonaws.com/backup-S3/my_incremental', 'ABC123', 'Abc+123') SETTINGS base_backup = S3('https://mars-doc-test.s3.amazonaws.com/backup-S3/my_backup', 'ABC123', 'Abc+123')
┌─id───────────────────────────────────┬─status─────────┐
│ f6cd3900-850f-41c9-94f1-0c4df33ea528 │ BACKUP_CREATED │
└──────────────────────────────────────┴────────────────┘

Restore from the incremental backup

This command restores the incremental backup into a new table, data3. Note that when an incremental backup is restored, the base backup is also included. Specify only the incremental backup when restoring:

RESTORE TABLE data AS data3 FROM S3('https://mars-doc-test.s3.amazonaws.com/backup-S3/my_incremental', 'ABC123', 'Abc+123')
┌─id───────────────────────────────────┬─status───┐
│ ff0c8c39-7dff-4324-a241-000796de11ca │ RESTORED │
└──────────────────────────────────────┴──────────┘

Verify the count

There were two inserts into the original table data, one with 1,000 rows and one with 100 rows, for a total of 1,100. Verify that the restored table has 1,100 rows:

SELECT count()
FROM data3
┌─count()─┐
│ 1100 │
└─────────┘

Verify the content

This compares the content of the original table, data with the restored table data3:

SELECT throwIf((
SELECT groupArray(tuple(*))
FROM data
) != (
SELECT groupArray(tuple(*))
FROM data3
), 'Data does not match after BACKUP/RESTORE')

BACKUP/RESTORE Using an S3 Disk

It is also possible to BACKUP/RESTORE to S3 by configuring an S3 disk in the ClickHouse storage configuration. Configure the disk like this by adding a file to /etc/clickhouse-server/config.d:

<clickhouse>
<storage_configuration>
<disks>
<s3_plain>
<type>s3_plain</type>
<endpoint></endpoint>
<access_key_id></access_key_id>
<secret_access_key></secret_access_key>
</s3_plain>
</disks>
<policies>
<s3>
<volumes>
<main>
<disk>s3_plain</disk>
</main>
</volumes>
</s3>
</policies>
</storage_configuration>

<backups>
<allowed_disk>s3_plain</allowed_disk>
</backups>
</clickhouse>

And then BACKUP/RESTORE as usual:

BACKUP TABLE data TO Disk('s3_plain', 'cloud_backup');
RESTORE TABLE data AS data_restored FROM Disk('s3_plain', 'cloud_backup');
note

But keep in mind that:

  • This disk should not be used for MergeTree itself, only for BACKUP/RESTORE
  • If your tables are backed by S3 storage and types of the disks are different, it doesn't use CopyObject calls to copy parts to the destination bucket, instead, it downloads and uploads them, which is very inefficient. Prefer to use BACKUP ... TO S3(<endpoint>) syntax for this use-case.

Alternatives

ClickHouse stores data on disk, and there are many ways to backup disks. These are some alternatives that have been used in the past, and that may fit in well in your environment.

Duplicating Source Data Somewhere Else

Often data that is ingested into ClickHouse is delivered through some sort of persistent queue, such as Apache Kafka. In this case it is possible to configure an additional set of subscribers that will read the same data stream while it is being written to ClickHouse and store it in cold storage somewhere. Most companies already have some default recommended cold storage, which could be an object store or a distributed filesystem like HDFS.

Filesystem Snapshots

Some local filesystems provide snapshot functionality (for example, ZFS), but they might not be the best choice for serving live queries. A possible solution is to create additional replicas with this kind of filesystem and exclude them from the Distributed tables that are used for SELECT queries. Snapshots on such replicas will be out of reach of any queries that modify data. As a bonus, these replicas might have special hardware configurations with more disks attached per server, which would be cost-effective.

For smaller volumes of data, a simple INSERT INTO ... SELECT ... to remote tables might work as well.

Manipulations with Parts

ClickHouse allows using the ALTER TABLE ... FREEZE PARTITION ... query to create a local copy of table partitions. This is implemented using hardlinks to the /var/lib/clickhouse/shadow/ folder, so it usually does not consume extra disk space for old data. The created copies of files are not handled by ClickHouse server, so you can just leave them there: you will have a simple backup that does not require any additional external system, but it will still be prone to hardware issues. For this reason, it’s better to remotely copy them to another location and then remove the local copies. Distributed filesystems and object stores are still a good options for this, but normal attached file servers with a large enough capacity might work as well (in this case the transfer will occur via the network filesystem or maybe rsync). Data can be restored from backup using the ALTER TABLE ... ATTACH PARTITION ...

For more information about queries related to partition manipulations, see the ALTER documentation.

A third-party tool is available to automate this approach: clickhouse-backup.

Settings to disallow concurrent backup/restore

To disallow concurrent backup/restore, you can use these settings respectively.

<clickhouse>
<backups>
<allow_concurrent_backups>false</allow_concurrent_backups>
<allow_concurrent_restores>false</allow_concurrent_restores>
</backups>
</clickhouse>

The default value for both is true, so by default concurrent backup/restores are allowed. When these settings are false on a cluster, only 1 backup/restore is allowed to run on a cluster at a time.

Configuring BACKUP/RESTORE to use an AzureBlobStorage Endpoint

To write backups to an AzureBlobStorage container you need the following pieces of information:

  • AzureBlobStorage endpoint connection string / url,
  • Container,
  • Path,
  • Account name (if url is specified)
  • Account Key (if url is specified)

The destination for a backup will be specified like this:

AzureBlobStorage('<connection string>/<url>', '<container>', '<path>', '<account name>', '<account key>')
BACKUP TABLE data TO AzureBlobStorage('DefaultEndpointsProtocol=http;AccountName=devstoreaccount1;AccountKey=Eby8vdM02xNOcqFlqUwJPLlmEtlCDXJ1OUzFT50uSRZ6IFsuFq2UVErCz4I6tq/K1SZFPTOtr/KBHBeksoGMGw==;BlobEndpoint=http://azurite1:10000/devstoreaccount1/;',
'test_container', 'data_backup');
RESTORE TABLE data AS data_restored FROM AzureBlobStorage('DefaultEndpointsProtocol=http;AccountName=devstoreaccount1;AccountKey=Eby8vdM02xNOcqFlqUwJPLlmEtlCDXJ1OUzFT50uSRZ6IFsuFq2UVErCz4I6tq/K1SZFPTOtr/KBHBeksoGMGw==;BlobEndpoint=http://azurite1:10000/devstoreaccount1/;',
'test_container', 'data_backup');